How to do an ethernet connection via

Home Forums Respiratory System How to do an ethernet connection via

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #127491

    The following is a list of actions to configure an ethernet connection to Look first for an Ethernet cable that works with the printer model you have. Pick from the Ethernet and Wired Network options when choosing the connection type. The need for a network router follows.
    In the event that the router has port limitations, you will require a switch or hub with open Ethernet ports. Connect the router and printer with an Ethernet cable. The network router can now be connected to your printer.


    Connect the printer to your network router, switch, or hub with an Ethernet cable.
    Make sure paper is loaded in the main tray, and then turn on the printer.
    Remove any plug or protective cover from the Ethernet port on the back of the printer.
    Connect an Ethernet cable to the printer and an available port on the router.


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.